Products
FEATURED PRODUCTS - Products
Create a collection of DVD-quality home videos or store music and other multimedia files with this 10-pack of Sony DVD+Rs. These discs are compatible with most existing DVD players and DVD-rom PC drives. Each DVD+R disc offers a 4.7GB capacity, enough room for movies, music, and more.
- Comes in a 10-pack with 4.7GB capacity for each DVD+R disc
- Create and store digital video, audio and multimedia files, DVD picture quality
- Compatible for playback with most existing DVD video players and DVD-rom PC drives
- Compatible with 1x - 48x recording speeds
- Price per DVD
- Single pack with jewel case
- Perfect for creating, editing and archiving family movies and digital photos.
- 4.7GB; more than 2 hours of MPEG2 video
- Playback compatible with most DVD players and DVD-ROM drives
- Note from Sony: all recorded DVDs may not be playback compatible with some older and/or entry level DVD systems.
- ExpressCard/34 Form Factor Module
- No IRQ, DMA, I/O Address resources required
- Hot swappable
- Easy plug & play
- Single Serial Port Interface
- Single Printer Port Interface
- Supports Windows® 2000, XP/2003 32/64 bit, Vista 32/64 bit, 7 32bit
System Requirements:
- Windows® 2000, XP/2003 32/64 bit, Vista 32/64 bit, 7 32bit
- ExpressCard-enabled system with an available ExpressCard slot
Features:
- Compatible with 32-bit CardBus slot
- Easy to Plug-n-Play installation
- Simple and easy way to connect devices to your notebooks
- Serial data transfer rate up to 115200bps
- Parallel data transfer rate up to 1.5MB/Sec
- CardBus Type II, 32-bit, 33MHz, 3.3V
- Connectors: - 1 x DBHD44 Female on CardBus Adapter - 2 x DB9 Male Serial Connector on Fan Out Cable - 1 x DB25 Female Parallel Connector on Fan Out Cable
- Supports Windows ME, 2000 and XP & MAC OS 8.6, Vista 32/64 bit, 7 32/64 bit
System Requirements:
- Windows® 2000/XP/Server 2003/Vista/7
- Pentium or equivalent notebook computer with available PC Card slot
Enable quick access to four 2.5"/3.5" SATA HDD over USB 3.0 or eSATA
The SATDOCK4U3E eSATA and USB 3.0 4-Bay SATA Hard Drive Docking Station is a convenient, time-saving storage solution for 2.5-inch and 3.5-inch SATA hard drives (HDD) and solid state drives (SSD) allowing for up to 4 SATA drives (tested with up to 4TB 3.5" and 1TB 2.5" drives per bay) to be conveniently and quickly connected to a host computer through a single connection.
The hard drive docking station features SuperSpeed USB 3.0 connectivity (also compatible with USB 2.0) with support for data transfer rates up to 5Gbps (10x faster than USB 2.0) or eSATA with Port Multiplier connectivity (up to 3Gbps), to provide fast connectivity to all 4 hard drives simultaneously.
The eSATA/USB 3.0 SATA hard drive docking station also features dual built-in, variable-speed 60mm fans that can be manually adjusted to keep each drive running cool, depending on the drives and operating environment, or turned off completely. Double the value of this hard drive docking station, using a SATA to IDE hard drive adapter (SAT2IDEADP), which enables you to use any 2.5 or 3.5in IDE hard drive in a SATA hard drive dock slot.
The StarTech.com Advantage
- Access up to 4 SATA drives simultaneously over a single USB 2.0/3.0 or eSATA connection
- Independent power buttons and eject mechanism for each SATA hard drive allows for quick and easy hot-swapping
- Dual, variable speed fans allows you to adjust the amount of cooling for any kind of environment or drives
Features
- Accepts up to 4 SATA hard drives simultaneously, in a single docking station
- Dual 60mm cooling fans mounted below the drives with variable speed controls (including OFF)
- Supports both 2.5" and 3.5" form factor hard drives (HDD) and solid state drives (SSD)
- SuperSpeed USB 3.0 compliant host interface with support for transfer rates up to 5 Gbps
- Backward compatible with USB 2.0 systems, out of the box
- High speed eSATA with Port Multiplier host interface with supported transfer rates up to 3 Gbps
- Patented hard drive eject push-buttons for each drive
- Independent power buttons for each hard drive
- Extra, easy-access spacing between each drive
- Four large, stable, non-slip table-top feet
- Plug-and-Play and Hot-Swap compatible
- Compatible with SATA revision 1/2/3 drives
StarTech.com’s 7-piece Screwdriver Kit provides the tools you need for computer maintenance and installations, including each of the following:
- SLOT 2.0 x 50mm
- SLOT 2.4 x 50mm
- SLOT 3.0 x 50mm
- PHILLIPS No. 00 x 50mm
- PHILLIPS No. 1 x 50mm
- TORX T15 x 50mm
- TORX T20 x 50mm
The StarTech.com Advantage
Contains a set of 7 commonly used precision screw drivers in a convenient carrying case
Exactly duplicate one 2.5in or 3.5in SATA hard drive to another, effortlessly and without a computer
The SATDOCK22RE USB and eSATA Standalone Duplicator Dock lets you duplicate/clone an existing hard drive without the use of a host computer system, or can be connected to a computer system for use as an external hard drive dock.
As a hard drive duplicator, you can create an exact 1 to 1 sector clone from one hard drive to another, including partition and boot sector information and all data, at a rate of 72MB/second - ensuring data integrity and consistency for sensitive operations, such as data recovery.
As an external hard drive dock, the duplicator/dock supports plug-and-play installation and can be connected to your host computer through USB 2.0 or eSATA, providing data transfer speeds up to 480Mbps or 3Gbps respectively from the hard drives to your computer system. Large capacity drives (tested with up to 4TB 3.5" and 1TB 2.5" drives per bay) can be used to greatly enhance your computer's storage/backup capabilities.
Not having to install the hard drives into an enclosure or tray system allows for quick setups - a perfect solution for situations that require swapping through multiple drives, which combined with no driver or software installation requirements delivers a convenient and versatile storage solution. The value of this hard drive docking station can be extended, using a SATA to IDE hard drive adapter (SAT2IDEADP), which enables you to use any 2.5 or 3.5in IDE hard drive in a SATA hard drive dock slot.
The StarTech.com Advantage
- Standalone cloning operation with LED progress indicator allows for creating 1:1 copies of hard drives without having to connect to a host computer.
- On-the-fly switching from Duplicator to USB 2.0 or eSATA connectivity with the push of a button, allows a connected computer system to read/write to the drives.
- A top slot-loading design and unique drive ejection mechanism provides quick and easy access to the data without having to install drives into an enclosure or tray.
Features
- Standalone Sector by Sector copying including the HPA
- LED progress bar for duplication status
- Push-button switching between Duplicator mode and Docking Station mode
- Patented hard drive eject push-buttons for each drive
- A single high speed eSATA host interface, with transfer rates up to 3Gbps
- Supports 2.5in or 3.5in form factor hard drives (HDD) or solid state drives (SSD)
- Supports SATA revision 1.0/2.0 (SATA 150/300) drives up to 2.0TB in capacity
- High speed USB 2.0 host interface, with transfer rates up to 480Mbps
- Compact, desktop-style form factor
- Hot-Swap and Plug-and-Play compatible
Use your 2.5in or 3.5in IDE hard drives in a SATA HDD Docking Station
The SAT2IDEADP SATA to IDE hard drive adapter enables you to use your 2.5-inch/3.5-inch IDE-based (PATA) hard drives in most StarTech.com SATA-based HDD docking stations and drive duplicators. The SATA-IDE adapter features all-metal construction that ensures maximum durability, and is fully compatible with IDE hard drives up to ATA-133 (133MBps).
The unique mounting style of the SATA/IDE adapter enables it to be easily mounted to an IDE/ATA hard drive, and inserted into a SATA hard drive dock bay, for quick and easy retrieval of data from older HDDs. The adapter can also be used to install IDE hard drives into SATA-only desktop computers, or any other scenario that requires an IDE hard drive to be connected through Serial ATA.
The SAT2IDEADP hard drive adapter works with most StarTech.com SATA HDD Docking Stations and Duplicators,
The StarTech.com Advantage
- Unique design allows any 2.5/3.5in IDE hard drive to be used and inserted (upright) into a SATA HDD docking station or duplicator drive bay
Features
- Supports 40-pin (3.5in) and 44-pin (2.5in) IDE hard drives
- Durable, metal construction
- Compatible with most 3.5in StarTech.com SATA hard drive docking stations and duplicators
- Large capacity hard drive support, with 48-bit LBA
- Compliant with SATA revision 1.0
- Compatible with PATA (IDE) 66/100/133 MBps hard drives
- Mounting holes for both 2.5in and 3.5in form factor IDE hard drives
Connect both an IDE and a SATA 2.5/3.5in hard drive or solid state drive to your computer system using an available USB 3.0 port, with support for UASP for optimal performance
The UNIDOCKU33 USB 3.0 Universal HDD / SSD Dock enables you to instantly access your 2.5 or 3.5in IDE and SATA hard drives through two top loading drive slots, saving you the hassle of mounting the drives into a computer or external enclosure or tray.
Enhanced with UASP (USB Attached SCSI Protocol), this hard drive docking station lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps), solid state drives (SSD) and hybrid, drives with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. See our UASP testing results below for further details.
The slot-loading design holds the SATA and IDE drives upright inside the docks, neatly keeping them off the desk, for convenience and a clutter-free setup. For SATA drives, the HDD can be inserted and connected directly through the designated dock slot, while the IDE drive slot is conveniently positioned near the rear panel 40-pin data and LP4 power connections, making it easy to connect to the dock using the included IDE data and power cables.
A single USB 3.0 connection to your host computer, enables access to both the IDE & SATA hard drives simultaneously - a convenient solution for migrating data from an IDE drive to a SATA drive or vice versa. The dock can also be used to greatly increase the storage and backup capabilities of your computer system with support for high capacity drives (tested with up to 6TB 3.5" and 2TB 2.5" drives).
Improved Performance with UASP
UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.
The StarTech.com Advantage
- Versatile configuration options, with support for IDE and SATA 2.5in and 3.5in drives
- Save time, with file transfers up to 70% faster than traditional USB 3.0 when used with a UASP-supported host
- Hassle-free operation and reduced workspace clutter, with upright slot-loading design
Features
- Maximum versatility with support for SATA & IDE as well as 2.5in and 3.5in HDDs & SSDs
- Optimal performance with support for SATA III & UASP
- Hassle-free operation with upright slot-loading SATA and IDE drive bays
- Compatible with USB 3.0 / 2.0 / 1.1 (5 Gbps / 480 Mbps / 1.5 Mbps)
- Compatible with SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives
- Compatible with PATA (IDE) 66/100/133 MBps hard drives
- Supports 2.5" or 3.5" form factor hard drives (HDD) or solid state drives (SSD)
- Compact, desktop-style form factor
- Plug-and-Play and hot-swap compatible
- Patented drive ejection mechanism for SATA drives
- Combined power switch and status LED for each drive
Here's the epitome of the small-and-cheap speaker system. The somewhat oddly named Thor Speaker SP-400 system is so small that you actually mount it in the computer - it screws into any vacant 5.25" drive bay! It's got its own built-in amplifier and a pair of 1" drivers, and it'll work in any PC with a sound card and a spare bay.
Setting up
Installing the SP-400 is simple enough. You screw it into any drive bay you like (screws are included), and you plug its passthrough power cable into any Molex connector from the power supply. The SP-400 runs from the 5V line, so it shouldn't overstress anybody's power supply - the 12V line is usually the one that runs closer to its limits.
Next, you screw an (included) blank expansion slot cover with a hole in it into any rear panel slot that's not in use, and feed the audio cable from the SP-100 through the hole, and around to the speaker output of your sound card. This is a little funny looking, but you try thinking of a better way to hook up internal speakers.
The SP-400 is made to take speaker level input from the sound card, and its volume control gives you enough flexibility that you won't need to fiddle too much with your sound card volume settings. There's also a headphone jack, and a little green power light.
Once the SP-400's in place, you can pivot the speakers left and right a little to aim the sound at where you're sitting. The pivot action is smooth, and indeed the whole unit feels nice and solid, considering the price.
Wax Ribbons are great for printing on regular paper/ label surfaces that are not kept in extreme conditions.
Specifications
- Width (mm) - 110 mm
- Length (M) - 300 m
- Colour - Blue
- Compatible with GoDex EZ series Label Printer
- Accessory Holders
- Batteries
- Cleaning Products
- Clipboards
- Coated Paper
- Comb and Slide Binders
- Craft Knives and Refills
- Drawing and Push Pins
- Fax Films/Fax Toner
- Flipchart Paper
- Inkjet Cartridges
- Labels
- Laminating Pouches
- Markers and Highlighters
- Moulded Magnets
- Photo Paper
- Ribbons
- Staples
- Till Rolls
- Toner Cartridges
- Whiteboard Supplies and Accessories